Zeche NotesPits, furnaces and spoil heaps of the Ruhr

03Headframes

How to read a headframe

A headframe, Fördergerüst, stands over the shaft and carries the wheels the ropes run over. Learn the kinds and the skyline tells you how old a pit is and where its engines stood.

Malakowturm

Malakoff tower · 1850 to 1880

A massive brick tower with the sheaves on top, built like a fortress to take the pull of the ropes, and named after one: the Malakoff fort at Sevastopol.

See one: Prosper II in Bottrop, Hannover in Bochum.

Strebengerüst

strut headframe · from 1870

A steel tower over the shaft with one long strut leaning towards the engine house. The strut takes the pull of the ropes, so it points to where the winding engine stood.

See one: Zeche Zollern in Dortmund.

Doppelstrebengerüst

double strut headframe · from 1900

A strut on each side, for two winding engines facing each other: a letter A with a tower through the middle.

See one: The skyline north of the Emscher.

Doppelbock

double trestle · 1932

Two trestles of solid steel plate leaning in from both sides, with the sheaves side by side on top. Schupp and Kremmer’s design became the model for many later headframes.

See one: Shaft XII at Zollverein, of course.

Hammerkopfturm

hammerhead tower · from 1920

A tower with a wide head holding the winding engines, so no engine house is needed. From below it looks like a hammer stood on its handle.

See one: Minister Stein in Dortmund, Erin in Castrop-Rauxel.

Förderturm

winding tower · from 1950

The late, plain kind: a tall box of concrete or steel with the engines at the top and the ropes inside, built for the deepest shafts.

See one: The last big pits of the northern Ruhr.

What they all do

The winding engine turns, the rope runs over the sheave and down the shaft, and the cage rises or falls, usually with a second cage coming up as the first goes down. One strut points to the engine house, struts both ways mean two engines, and no wheels at all means a tower with the engines inside.